L901 / L901 Plus Industrial Color Label Printer
Top Uses & Applications
Powerful in both roll-to-roll and inline applications
Integrates directly with label finishers, applicators, dispensers, and more
The L901 combines industrial design, exceptional image quality, and high production speeds with a new ability to service and maintain the printhead “on-the-fly.” This makes the L901 perfect for long roll-to-roll print jobs or inline integration with label finishers, applicators, dispensers, and more.
Produce vibrant, full-color prints in high resolution. Large print volumes are now more economical, with five high-capacity 250ml CMYKK ink cartridges delivering an ultra-low cost per label.
L901 Plus with Watershield™ Water-Resistant Inks
The Plus model offers increased water and moisture resistance1.
Watershield-printed labels are significantly more resistant to the effects of prolonged moisture exposure than conventional dye-based inkjet labels. This makes the L901 Plus perfect for applications such as chilled beverages, foods, chemical or pharmaceutical products.
This new technology also produces deeper blacks, uses more responsibly-sourced inks2, and helps to prolong the life of the printhead3.
1 Water resistance can be media-dependent. Always test your printed label to be sure it meets your requirements.
2 Watershield™ inks do not contain chemicals that are considered to be harmful to humans or the environment.
3 Memjet tested ejection life internally and found an average above 2X printhead life. Actual results may vary due to factors such as environment and frequency of use.
- Inline & high-volume printing
- Fast print speeds (≤ 12 IPS)
- Super low ink costs
- Water-resistant inks available
L901 / L901 Plus Details
Roll-to-Roll Label Printing
The XL Unwinder/Rewinder system pairs perfectly with the L901 to allow for continuous, roll-to-roll label production. Easily handle rolls up to 12″ in diameter outside diameter for high-volume jobs and reduced media costs.
Designed for Inline Applications
The L901’s Memjet VersaPass printhead technology allows for on-the-fly maintenance, which makes for perfect inline integration with dispensers, applicators, label finishers and high-volume digital label press configurations.
Ultra-low Ink Cost
Five high-capacity ink cartridges (CMYKK) offer extremely low ink cost per print, a top factor in assessing cost of ownership while choosing a printer. Learn the exact ink cost of your label design.
High Speed & High Resolution
A stationary printhead offers blazing fast print speeds of up to 60 inches (18m) per minute. Keep up with most high-volume jobs, whether in a continuous roll-to-roll setup or inline with a digital press.
|Print method:||Memjet Waterfall Printhead Technology® 11 Integrated Circuit (IC) Chips – 70,400 nozzles (6,400 per IC Chip)|
|Inks:||Dye-based, 250mL CMYKK cartridges (1.25L total) — Watershield water-resistant formula available|
|Print resolution:||1600x1600 dpi to 1600x800 dpi|
|Print speed:||6"–12" per second (152mm–305mm)|
|Print width:||8.5" (216mm)|
|Media types:||Compatible with a range of paper, polyester, polypropylene, and vinyl label stocks|
|Media width:||2"–9" (50.8mm–229mm)|
|Media length:||2"–48" (50.8mm–1219mm)|
|Thickness:||0.005"-0.01" (0.13mm–0.3mm) including liner|
|Maximum roll diameter:||10" (250mm) with XL Unwinder/Rewinder System|
|Core diameter:||Requires 3" (76.2mm) cardboard core|
|Media sensors:||Gap (movable), continuous, black mark|
|Die-cut label gap:||Minimum 0.125" (3.0mm) Maximum 0.3" (8.0mm)|
|Black mark:||0.125" (3mm) wide, 1" (25.4mm) long, Left side position|
|Interfaces:||USB 2.0, TCP/IP (Manual IP configuration or DHCP), GPIO available for external device control|
|Operating system:||Windows 7+ (32 and 64 bit)|
|Barcode font:||1D Barcode at least Grade B (Code39) with 10mils bar width|
|Two-dimensional code printing:||2D Barcode at least Grade B (PDF417) with 10mils cell size|
|Operating temperature:||59°–95°F (15°–35°C) at RH 20–80%|
|Storage temperature:||23°–113°F (-5°–50°C) at RH up to 85%, non-condensing at 65°|
|Overall dimensions:||18.9" (480mm) W, 19" (485mm) D, 21.1" (535mm) H|
|Weight:||85 lbs. (38.5kg)|
|Rated voltage:||AC 110V – 220V, auto-sensing|
|Agency Certifications||CE, FCC, UL|
|Afinia part numbers:||L901 Standard|
L901 Printer: 29698
Black Ink: 26730
Cyan Ink: 26723
Magenta Ink: 26716
Yellow Ink: 26709
L901 Plus (Watershield™)
L901 Plus Printer: 32344
Black Plus Ink: 30461
Cyan Plus Ink: 30454
Magenta Plus Ink: 30447
Yellow Plus Ink: 30440
|Accessories:||XL Unwinder: 26681|
XL Rewinder: 28802
*with optional XL Unwind/Rewind system